CallCall (520) 654-4057

The R-410A refrigerant change, for homeowners

You can keep using and repairing your R-410A air conditioner. EPA's rule applies to new systems: residential AC and heat pump systems built with components made on or after January 1, 2025 must use a refrigerant with a global warming potential under 700.

Updated October 27, 2026 ยท Sources listed at the end

What the rule says

Under the AIM Act Technology Transitions rule, EPA set a global warming potential (GWP) limit of 700 for new residential and light commercial air conditioning and heat pump systems, with a compliance date of January 1, 2025. EPA's FAQ notes that R-32 is below that limit. It also names R-454B, along with R-32, as mildly flammable refrigerants that may only be used in equipment designed for them.

The rule has changed once already. An earlier version would have stopped installation of new R-410A systems on January 1, 2026, even if their parts were made before 2025. EPA's reconsideration rule of May 26, 2026 removed that deadline for systems whose components were all manufactured or imported before January 1, 2025, according to EPA's sector table (updated August 28, 2026). Some EPA pages still describe the older deadline.

If you have an R-410A system

  • EPA says you can continue to use and repair it.
  • A failed condensing unit, indoor coil or smaller part can be replaced with a similar R-410A part, according to EPA's FAQ. Components used to repair existing systems aren't subject to the restrictions.
  • R-410A parts made after January 1, 2025 must be labeled for servicing existing equipment only.

If you are replacing the system

A new system will usually use one of the new refrigerants, and its outdoor unit and indoor coil have to match. Swapping only the outdoor unit onto an old R-410A coil isn't the same thing as a matched new system. Ask the contractor which refrigerant the quoted equipment uses and whether the coil is being replaced too. Replacement costs.

The SEER2 minimums didn't change with the refrigerant: split-system air conditioners under 45,000 Btu/h installed in Arizona since 2023 must be at least 14.3 SEER2.

Questions Tucson homeowners ask

Do I have to replace my R-410A air conditioner?

No. EPA says the rule doesn't limit the use of existing systems, and you can continue to repair them, including with R-410A replacement parts.

Can new R-410A systems still be installed?

Only systems whose components were all made or imported before January 1, 2025, under EPA's May 2026 reconsideration rule. Systems built with newer components must use refrigerant under 700 GWP.

Sources

  1. US EPA: Technology Transitions HFC Restrictions by Sector (updated August 28, 2026)
  2. US EPA: Frequent Questions on the Phasedown of Hydrofluorocarbons (updated September 14, 2026)
  3. US DOE: 2023 Central Air Conditioner and Heat Pump Standards FAQ (October 5, 2022)